nhacai i9bet

Product description



　　Dual Input Meter

　　The accuracy of all measurements is within ±(% of reading + number of counts) from 18 °C to 28 °C.

　　Add 0.1x (specific accuracy) for each °C below 18 °C or above 28 °C. For voltage measurements with 10:1 probe, add probe uncertainty +1%. More than one waveform period must be visible on the screen.

　　Input A and input B - DC voltage (VDC)

　　Ranges

　　500 mV, 5 V, 50 V, 500 V, 750 V.

　　Accuracy

　　±(0.5% +5 counts).

　　Common mode rejection (CMRR)

　　>100 dB @ dc, >60 dB @ 50, 60, or 400 Hz.

　　Full scale reading

　　5000 counts.

　　True-rms voltages (V ac and V ac+dc)

　　Ranges

　　500 mV, 5 V, 50 V, 500 V, 750 V.

　　Accuracy for 5% to 100% of range (DC coupled)

　　DC to 60 Hz (V ac+dc) - ±(1% +10 counts)

　　1 Hz to 60 Hz (V ac) - ±(1% +10 counts).

　　Accuracy for 5% to 100% of range (AC or dc coupled)

　　60 Hz to 20 kHz - ±(2.5% +15 counts).

　　DC rejection (only VAC)

　　>50 dB.

　　Common mode rejection (CMRR)

　　>100 dB @ dc

　　>60 dB @ 50, 60, or 400 Hz.

　　Full scale reading

　　5000 counts, reading is independent of any signal crest factor.

　　Peak

　　Modes

　　Max peak, Min peak, or pk-to-pk.

　　Ranges

　　500 mV, 5 V, 50 V, 500 V, 2200 V.

　　Accuracy

　　Accuracy Max peak or Min peak: 5% of full scale

　　Accuracy Peak-to-Peak: 10% of full scale.

　　Full scale reading

　　500 counts.

　　Frequency (Hz)

　　Ranges

　　123B: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz,1 MHz, 10 MHz, and 50 MHz.

　　Frequency range

　　15 Hz (1 Hz) to 50 MHz in continuous autoset.

　　Accuracy @1 Hz to 1 MHz

　　±(0.5% +2 counts).

　　Full scale reading

　　10,000 counts.

　　RPM

　　Max reading

　　50.00 kRPM.

　　Accuracy

　　±(0.5% +2 counts).

　　Duty cycle (PULSE)

　　Range

　　2% to 98%.

　　Frequency range

　　15 Hz (1 Hz) to 30 MHz in continuous autoset.

　　Pulse width (PULSE)

　　Frequency range

　　15 Hz (1 Hz) to 30 MHz in continuous autoset.

　　Full scale reading

　　1000 counts.

　　Amperes (AMP)

　　With current clamp

　　Ranges: Same as V dc, V ac, V ac+dc, or PEAK

　　Scale factors: 0.1 mV/A, 1 mV/A, 10 mV/A, 100 mV/A, 400 mV/A, 1 V/A, 10 mV/mA.

　　Temperature (TEMP) with optional temperature probe

　　Range

　　200 °C/div (200 °F/div).

　　Scale factor

　　1 mV/°C and 1 mV/°F.

　　Accuracy

　　As V dc (add temp. probe uncertainty).

　　Decibel (dB)

　　0 dBV

　　1 V.

　　0 dBm (600 Ω /50 Ω)

　　1 mW referenced to 600 Ω or 50 Ω.

　　dB on

　　V dc, V ac, or Vac+dc.

　　Full scale reading

　　1000 counts.

　　Crest factor (CREST)

　　Range

　　1 to 10.

　　Full scale reading

　　90 Counts.

　　Phase

　　Modes

　　A to B, B to A.

　　Range

　　0 to 359 degrees.

　　Resolution

　　1 degree.

　　Miscellaneous

　　Display

　　5.7-inch color active matrix TFT

　　640 x 480 pixels.

　　Waveform Display

　　Vertical: 10 div of 40 pixels

　　Horizontal: 12 div of 40 pixels.

　　Power

　　External: Via Power Adapter BC430

　　Input voltage: 10 V DC to 21 V DC

　　Power consumption: 5 W typical

　　Input connector: 5 mm jack

　　Internal: Via Battery Pack BP290

　　Battery power: Rechargeable Li-Ion 10.8 V

　　Operating time: 7 hours with 50% backlight brightness

　　Charging time: 4 hours with test tool off, 7 hours with test tool on

　　Allowable ambient temp: 0 to 40 °C (32 to 104 °F) during charging.

　　Memory

　　Internal memory can store 20 data sets (screen waveform and setup).

　　Interface

　　Optically isolated: Transfer screen copies (bitmaps), settings and data

　　USB to PC/laptop: OC4USB optically isolated USB adapter/cable, (optional), using FlukeView® software for Windows®..

　　Dimensions

　　259 x 132 x 55 mm (10.2 x 5.2 x 2.15 in).

　　Weight

　　1.4 kg (3.2 lb) including battery pack.

　　Fluke 123B warranty

　　3 years.